Tracking with Basic Option
After installation, our Technician will provide you with your tracker number usually MTN line (We partner with MTN due to their vast coverage but tracker can work with any standard network). You can save your tracker number on your phone, write it down in your diary or at the back of calendar or memorize it if you can.
Location: (Tracking via Calling/SMS) To know the location of your vehicle, Call the tracker number; tracker will ring in a silent mode in the car and busy the call. It will send you a text message within a minute, See below image:
Click on the google link in the text message to see the location of the vehicle on your phone either on browser or google map (Note that your phone must be internet enabled and connected). Result will look like below image:
Zoom in and out on map with your two fingers for more accurate and understandable results.
Engine Control: You can stop the engine of your vehicle successfully in case of theft, robbery, unauthorized access or driver takes the vehicle to where you did not send him.
Send above command as text message to tracker number, the engine of the vehicle will shut down within few seconds. The command is better in lower cases.
Above command to tracker number as text message will activate the vehicle engine. Just insert the key and start the vehicle. Everything will work fine.
Voice Monitoring: Vehicle’s owner can listen to whatever conversation going in the vehicle in real time whether real conversation or some music, you would be able to listen to it.
Above command will switch tracker from default tracking mode to monitoring mode. After this command, your tracker will reply you back “monitor ok”. Then go ahead and call the tracker number, it will ring and link you to the vehicle so you can listen to what is going on in the vehicle remotely. End the call when you are satisfied.
Above command will switch the tracker back to tracking mode. It is important for Basic Option customers to do this in order to be able to get the location when next they call the tracker number. You don’t need to be sending “tracker123456” all the time before tracking. Only do it whenever you switched to monitor mode.
Password Change: “123456” is the factory/default password and you can change at any time you want for security reasons.
Above command will change factory password to “778899”. You password must be 6 digits. Please note that 778899 is just an example, you can use any figures as long as it is 6 digits.
Next time you want to stop the engine of the car, the command will look like: stop778899 and resume778899 activate the vehicle engine.
There are 5 numbers to be allowed to authorize in the tracker at most.
Call and track the tracker device for 10 times from cell phone in success, it will make the cell phone number as the authorized number automatically, and reply “add master ok”.
Authorization: Send SMS “admin+password+space+cell phone number” to set up an authorized number, the other authorized numbers should be set by the first authorized number, if the number is successfully authorized, the unit will reply“ admin OK” by SMS.
Delete Authorization: Send SMS “noadmin+password+space+authorized number” to delete the authorized number.
If you want to track the target tracker device when it enters into another country, you must add the country code before the cell phone number, for example, send SMS “admin123456 2348060306353” to the device. Note: 08060306353 will be set up as the authorized number.
Do not hesitate to contact us 247 on 0806 030 5252 or 0809 505 6353 via Call, Text message or Whatsapp for further clarification and guidance.